Technologies
Every technology we offer, grouped as in our company profile: condition assessment, gravity rehabilitation, pressure and drinking water, cleaning, robotics and support, and future technologies.
01/ 05
CCTV and condition assessment
We see inside the pipe before anyone decides how to fix it. Crawlers with laser and LiDAR profiling, floating units with sonar, and in-line inspection of live pressurised mains, with every defect coded and measured.

- I-01Robotic CCTV crawlersPan-and-tilt crawler surveys of sewers, drains and trunk mains.DN90 to DN2400
- I-02Push-rod camerasCompact cameras for small drains, laterals, building pipes and stacks.DN40 to DN600
- I-03Manhole zoom cameraRapid checks of pipes from the manhole, without man-entry.DN150 and up
- I-04Sonar and floating inspectionAbove- and below-waterline profiling of partly or fully charged pipes.DN400 and up (sonar DN500 and up)
- I-05Laser and LiDAR profilingOvality, deformation and cross-section measurement for design.Crawler or floating platform
- I-06Manhole 3D scanning360° imaging and point clouds of manholes and shafts.Up to 15 m
- I-07Pre- and post-laying CCTVAcceptance and end-of-DLP surveys of new pipelines.Pre-laying, post-laying, end of DLP
- I-083D gyroscopic mappingXYZ line and level of buried pipelines.XYZ alignment
- I-09In-line inspection of live mainsCamera inspection inside pressure mains while they stay in service.DN200 and up, via DN80 fittings
- I-10Leak detection and pressure testingAcoustic leak location and pressure, air and leakage testing.Acoustic, hydrostatic, air
02/ 05
Gravity rehabilitation
Structural and semi-structural renewal of sewers, drains, culverts and chambers from existing access. Each liner is designed to the structural class the host pipe demands.

- T-01Cured-in-place pipe (CIPP)A jointless new pipe formed inside the old one.DN150 to DN1500
- T-02UV light-cured liningGlass-reinforced liners cured by UV light, in hours.DN150 to DN2200
- T-03Spiral-wound liningLive-flow renewal of large trunk sewers.DN200 to DN3000 (up to 3 m)
- T-04Lateral lining and point repairSectional repairs, lateral liners and connection seals.Sectional and patch
- T-05Manhole and tank rehabilitationSealing, coating and lining of manholes, chambers and tanks.Manholes, chambers, wet wells, tanks
03/ 05
Pressure and drinking water
Lining and sealing systems for potable, process and pressure mains, using materials certified for drinking-water contact where required.

- T-06Spray-in-place pipe (SIPP)Spray-applied structural coatings for pressure and potable pipes.DN100 to DN3000
- T-07Pressure pipe liningStructural and semi-structural liners for pressurised mains.Pull-in-place CIPP, UV CIPP, composite liners
- T-08Internal joint sealsEPDM seals fitted from inside large-diameter water mains.Large-diameter water mains
04/ 05
Cleaning, robotics and support
The preparation that makes good lining possible: jetting, robotic cutting, overpumping and surveys, run by our own crews.

- S-01Robotic cutting and reinstatementIntrusion removal and reopening of laterals after lining.Reinstatement, milling, intrusion removal
- S-02Cleaning, jetting and descalingHigh-pressure jetting, mechanical cleaning and pigging.Jetting, mechanical, pneumatic pigging
- S-03Bypass and flow diversionOverpumping so works proceed while services keep running.Overpumping and flow diversion
- S-04GPR, cable detection and trial trenchesLocating buried services before works start.GPR, cable and pipe locators
- S-05Underwater and confined-space dronesRemote inspection of submerged and enclosed spaces.Tanks, intakes, outfalls
- S-06Equipment and materials supplyInspection systems and lining materials, with training.Crawlers, push-rod and zoom cameras
05/ 05
Future technologies
AI-assisted defect coding, automated report generation and asset management, built on the survey data we capture. Every AI result is checked by a trained coder before it is issued.

Contact
Tell us about your pipeline.
Share the location, pipe size and material, length and the problem you are seeing. We will reply with next steps.
- Coimbatore office
- 12B, Door No. 1996/7A, MR Garden
Narayana Avenue, Krishna Colony
Coimbatore, Tamil Nadu 641015, India - Telephone
- +91 97510 53539
