Perma-Liner Industries India Pvt. Ltd.

02 · Gravity rehabilitation · T-01

Cured-in-place pipe (CIPP)

A jointless new pipe formed inside the old one.

Crew feeding the liner into the inversion unit.
Crew feeding the liner into the inversion unit.
Diameter range
DN150 to DN1500
Method
Inversion or pull-in-place
Cure
Steam, hot water, ambient or latent cure
Liner design
Custom-fit to each project

Overview

A resin-saturated felt or glass-fibre tube is inverted or pulled into the host pipe, then cured in place to form a continuous, jointless pipe within the old one.

Liner thickness is designed to the structural class the host pipe needs, from fully deteriorated stand-alone designs to semi-structural liners, selected to match the asset's condition.

Every liner is custom-fit: diameter, length, wall thickness and resin are specified for the project's defect profile, operating conditions and host pipe material. We deliver the work end to end, from design and liner supply to installation and handover.

How it works

  1. 01

    Design

    Structural class and thickness set from the CCTV and profile data.

  2. 02

    Wet-out

    Liner impregnated with resin under controlled conditions.

  3. 03

    Install

    Liner inverted by air or water, or pulled into place.

  4. 04

    Cure

    Steam, hot water or ambient cure, then end trimming and CCTV.

Applications

  • Cracked, leaking or root-damaged sewers
  • Storm drains and culverts
  • Water mains, using liners suitable for drinking water
  • Pipes under roads, buildings and rail